S38B35 Block, KDFI MS Plug & Play

[BenGerman]

I still have some S38 parts left over:

KDFI (Megasquirt Plug & Play), E34 M1.3 Harness - $700
S38 Block (Good crosshatching, no signs of cracks) - $400

Factory Pistons - SOLD
Factory Rods - SOLD (ideal to build a custom, well revving M30)
B36 Head, incl. Valves, needs to be rebuilt - SOLD
B35 Valve Cover - SOLD
Schrick 276/284 Cams NIB - SOLD
ITBs (disassembled, cleaned, new bearings, runners port matched to S38B35) - SOLD
ECU (no chip, but known good condition when pulled)- SOLD
Intake Manifold with runners - SOLD
Airbox (Modified for Miller MAF)- SOLD
3 Chain guides - SOLD
ARP Head Stud Kit NIB - SOLD

[Burnze]

I'll take the airbox. I'll hit you up on the chat!

[okorn]

Can you send me some pics of the rods? Thanks!!

[MrZ]

Ben, on the cams, I thought that the M88 / S38B35 ones were 272/272. I think the 276/284 was for the S14.

Can you confirm?

[BenGerman]

Yes, the ones that everybody uses are 272/272. That is barely an increase over the B36 cams.

The 276/284 is the S14 go to for a reason. And since we have the grown up version of the S14 these are the way to go!
In short: I can confirm that they are indeed the 276/284 profile of the S14 adapted to the S38.

[tylerrose]

Ben, sent an inquiry on the valve cover a few days ago. Shoot me some photos when you have a chance.

[okorn]

I sent an inquiry as well! Thanks Ben.

[BenGerman]

Hi guys, sorry, I continue to be extremly busy at work and I've received a ton of requests, several for larger package deals. Please bear with me as I work through them.

I took some pictures just now and updated the description.

https://drive.google.com/drive/folders/ ... sp=sharing

[okorn]

Thanks Ben, no worries! I sent you another message.

[BenGerman]

Most of the parts have been sold.

[hx2413]

Looking for S38B35 airbox. Do you have any contacts?