Specific conversations and info for the BMW E28 M5 and M535i.
Scotts
Posts: 21 Joined: May 13, 2008
Location: Pasadena CA
Post
by Scotts » Dec 01, 2009 12:31 AM
Am going to have a complete brake job done and was thinking of upgrading to SS lines.
Any disadvantages to using them (I have standard e28 brakes now)?
Any advice on the best manufacturer for SS lines (for an e28 M5)?
Thanks as usual for the advice!
Martin in BellevueWA
Posts: 593 Joined: Feb 12, 2006
Location: Bellevue,WA
Post
by Martin in BellevueWA » Dec 01, 2009 1:43 AM
Get lines with the sheath over the braids. Dirt can get into the braids and cause abrasion leading to line failure. Earl's are pretty great. Think I bought mine from bimerworld.com.
wkohler
Posts: 50939 Joined: Oct 05, 2006
Location: Phönix, Arizona, USA
Contact:
Post
by wkohler » Dec 01, 2009 1:58 AM
UUC lines kick ass. I have them on my car now.
Scotts
Posts: 21 Joined: May 13, 2008
Location: Pasadena CA
Post
by Scotts » Dec 01, 2009 1:05 PM
Should have asked right up front,
Any advice on top quality brake pads and fluids (for street driving)?
Thanks guys.
wkohler
Posts: 50939 Joined: Oct 05, 2006
Location: Phönix, Arizona, USA
Contact:
Post
by wkohler » Dec 01, 2009 2:09 PM
Ate gold fluid (same as the super blue, but it stains and you're not racing).
Jurid pads.
Bennetts22
Posts: 348 Joined: May 02, 2008
Location: WI
Post
by Bennetts22 » Dec 01, 2009 2:54 PM
I have a set of goodridge if you go that route
djoc2000
Posts: 6 Joined: Dec 01, 2009
Post
by djoc2000 » Dec 02, 2009 9:20 PM
I also have a set of goodridge on my 96 thunderbird and they helped alot. I will be adding some to a 2000 solara this weekend.
vinceg101
Posts: 5124 Joined: Jun 20, 2007
Location: Los Angeles, CA
Post
by vinceg101 » Dec 03, 2009 9:13 PM
wkohler wrote: UUC lines kick ass. I have them on my car now.
x2
DRP535
Posts: 3636 Joined: Feb 12, 2006
Location: Dullsville, WA, Australia
Post
by DRP535 » Dec 05, 2009 9:17 PM
I've just put UUC lines on my car and honestly notice no difference I can attribute soley to the lines at all. The other changes I made at the same time all make a far greater contribution to the feel than the stainless lines.
That said, they were cheap and I would definitely fit them again if I had my time.
mooseheadm5
Posts: 23035 Joined: Apr 08, 2009
Location: Charlottesville, VA
Contact:
Post
by mooseheadm5 » Dec 05, 2009 10:14 PM
I've not heard good things about UUC QC as of late. I'd be careful with them.
rcbmw
Posts: 846 Joined: Feb 12, 2006
Post
by rcbmw » Dec 06, 2009 2:38 AM
While the braking feel will not change appreciably with the addition of PTFE+braided stainless steel hoses, Goodrige does offer a good product.
Best,
RCBMW