Good day at the auto wrecker....

Talk about BMW E28s and the people who own them. Use Tech Talk for tech questions and topics.
Post Reply
Al Canuck
Posts: 658
Joined: Feb 12, 2006

Post by Al Canuck »

Went to the local wrecker today, looking for whatever. They just got an 88 528e in, that was not overly stripped yet. I scored a perfect Hirschmann power antenna, full set of lighted window switches, fuel pump inspection cover, mirror mounted tweeters, fuse box cover, and some other small crap. I go to the counter, and the guy there knows me. He tells me to take it! FREE! He needs some upholstery work on his VW, so it will come back to me, but still, what a great day!

The car also has a perfect front fender that I need, a couple of doors I need, a crack free dash, and the shiniest rear bumper I've ever seen. I'll be going back for all that stuff as well.

Al
Blue Shadow
Posts: 10531
Joined: Feb 12, 2006
Location: SE PA

Post by Blue Shadow »

Nice haul for the money!! Looks like you may be getting more of that car at very low prices to reduce that interior restoration. I know a guy that trades for most of his car work, I just need to be in a different field to do the same. Oh well.
Al Canuck
Posts: 658
Joined: Feb 12, 2006

Post by Al Canuck »

Yeah, I'm going to go back and talk to him about the dash, and some body parts.

I trade LOTS of stuff for trim work. Cars, parts, you name it. My 323i is going in for minor rust repair, and a hand blocked, multi layer base/clear paint next week. Retail on the body and paint work would put it in the $6-8K range. I'm doing an interior in a 52 Chevy as trade. No complaints.

Al
Blue Shadow
Posts: 10531
Joined: Feb 12, 2006
Location: SE PA

Post by Blue Shadow »

That is a great deal. If the quality of the work stands up to your estimate you are winning that one, but both folks are doing work and using supplies, just swapping. Good all around.
Al Canuck
Posts: 658
Joined: Feb 12, 2006

Post by Al Canuck »

His work is top notch. He's got several of my client's cars right now. A 73 2002, an 83 VW GTI, my 323i, and a 70 2800cs after the 02 is done. He's a small, one man show, so his rates are decent, and his work is top notch. A true panel beater, and skilled metal worker. The 323i is going to be VERY nice!

Al
fastpat
Posts: 1036
Joined: Feb 12, 2006
Location: Travelers Rest, South Carolina

Post by fastpat »

[QUOTE="Al Canuck"]Went to the local wrecker today, looking for whatever. They just got an 88 528e in, that was not overly stripped yet. I scored a perfect Hirschmann power antenna, full set of lighted window switches, fuel pump inspection cover, mirror mounted tweeters, fuse box cover, and some other small crap. I go to the counter, and the guy there knows me. He tells me to take it! FREE! He needs some upholstery work on his VW, so it will come back to me, but still, what a great day!

The car also has a perfect front fender that I need, a couple of doors I need, a crack free dash, and the shiniest rear bumper I've ever seen. I'll be going back for all that stuff as well.

Al[/QUOTE]

Ya' gotta' love that professional courtesy, now how about a full set of custom carpets for my e30 convertible in exchange for me doing a little surgery on you, you know, everyone has extra parts they need cut off. :p
Velocewest
Posts: 1558
Joined: Feb 12, 2006
Location: UK

Post by Velocewest »

[QUOTE="fastpat"]Ya' gotta' love that professional courtesy, now how about a full set of custom carpets for my e30 convertible in exchange for me doing a little surgery on you, you know, everyone has extra parts they need cut off. :p [/QUOTE]

Are you Jewish, Al? Do you want to be? :D
Al Canuck
Posts: 658
Joined: Feb 12, 2006

Post by Al Canuck »

You're a surgeon, Pat? I've had my share of surgery already. I'm 29 years old, and in the past 5 years, I've had:

2 Inguinol hernia repairs
Ulnar shortening osteotomy
Ganglian cist removed from ring finger
Bi lateral micro-discectomy
Plate removed after ulnar osteotomy

In other words, I'm done with surgery! I do still have a nagging ACL in my left knee though.

Al 'Larson' - Not very Jewish sounding!
fastpat
Posts: 1036
Joined: Feb 12, 2006
Location: Travelers Rest, South Carolina

Post by fastpat »

Al Canuck wrote:You're a surgeon, Pat?
No, operating room nurse, but I'm good with a blade, and if you ask nicely, I give anesthesia with all my surgical procedures.
I've had my share of surgery already. I'm 29 years old, and in the past 5 years, I've had:

2 Inguinol hernia repairs
With or without mesh? We do them laparoscopically.
Ulnar shortening osteotomy
You're pretty young for that procedure, did you break your arm sometime in the past?
Ganglian cist removed from ring finger
That just the luck of the draw. Etiology is unknown.
Bi lateral micro-discectomy
You're young for this operation as well, were you having numbness in your legs?
Plate removed after ulnar osteotomy

Let me guess, implant generated pain?
In other words, I'm done with surgery! I do still have a nagging ACL in my left knee though.
Oh, man, for an ACL repair, I'd have to have a new paint job, new upholstery, and the new carpets. That surgery takes hours.
Shawn D.
Beamter
Beamter
Posts: 22370
Joined: Feb 12, 2006
Location: Alpharetta, GA
Contact:

Post by Shawn D. »

Well, it ain't in the league of surgery vs. automotive bartering, but my Dad (a BMW-trained tech with his own shop*) has often done work for restaurant managers who have a certain dollar amount they can give away daily for "customer satisfaction" purposes; they'd trade tuneups/oil changes/etc. for meals for the family. For a good long while, if we went to eat dinner with my Dad & Step-Mom, we'd know exactly where we'd be going... Ryan's (an all-you-can eat place). You really couldn't beat the price!

*no, I did not grow up with my Dad, I got my mechanicin' genetically.
Al Canuck
Posts: 658
Joined: Feb 12, 2006

Post by Al Canuck »

No, operating room nurse, but I'm good with a blade, and if you ask nicely, I give anesthesia with all my surgical procedures.

Anesthesia is my favourite! I enjoy the little tight in my throat, anf then out! Great fun!

With or without mesh? We do them laparoscopically.

Mesh for me. It was actually 1 hernia, started recovering nicely, and then 9 days later I was in an ambulance, headed for the hospital. Horrible pain, and weird looking junk on the ultrasound. "Groin exploration surgery" found a blood clot.

You're pretty young for that procedure, did you break your arm sometime in the past?

Took a tumble off a CBR900RR at 130km/h. Seemed to get through it unscathed, but wrist started aching badly after a couple years. Cracking horribly as well. 3 plastic surgeons, and 1 orthopaedic said they couldn't do anything. Enter Dr. Ken Favero. Hand surgeon up here. He sent me for a bone scan, and said "Yup, I can fix it!". He did. Still cracks like hell, but at least it doesn't hurt, and I can work out.

That just the luck of the draw. Etiology is unknown.

Yup. It was bugging me a bit, so I had Dr. Favero take it out when he removed my plate. 3 days before Xmas a couple years ago.

You're young for this operation as well, were you having numbness in your legs?

Not sure what caused this one, but a combination of baseball, hockey, and working out blew a couple discs. Can't remember the level, but right side had a fragment in the spinal column, and the left side was bulging badly. Lived with the pain, and lack of leg feeling for 8 months before I got to see a neurologist. After my visit with him, he was mortified by the sad condition of my back, and booked an OR 6 days later. Took 6 months to recover, and I gained 70lb. Back in the gym 5 nights per week now, and losing it again.

Let me guess, implant generated pain?

Little bit, but he also said he likes to remove them whenever possible.

Oh, man, for an ACL repair, I'd have to have a new paint job, new upholstery, and the new carpets. That surgery takes hours.


I'll let you know!

Al
Post Reply