Hood Insulation

Specific conversations and info for the BMW E28 M5 and M535i.
Post Reply
E28M5 SubDriver
Posts: 18
Joined: Jun 15, 2008
Location: Honolulu, HI

Hood Insulation

Post by E28M5 SubDriver »

Since I've owned my M5 I always noted that the PO had removed the underhood insulation for whatever reason. Now I'm growing concerned that here in the Hawaii sun/heat with how hot the S38 runs that my hood paint will cook off (already starting to see evidence to this end). Going to Maximilian and other OE suppliers it looks like the underhood insulation is NLA. Anybody have good substitutes? I imagine folks running turbo engines (Dinan and Alpina B7) probably have good products at hand, but a search of the site here didn't turn up any compelling answers...thoughts on good replacements for the factory underhood insulation?
-Josh
wkohler
Posts: 50939
Joined: Oct 05, 2006
Location: Phönix, Arizona, USA
Contact:

Post by wkohler »

Are there wrecking yards in paradise? I imagine the 528e piece (which is the same functionally and more plentiful should work. I almost think they're the same piece.
E28M5 SubDriver
Posts: 18
Joined: Jun 15, 2008
Location: Honolulu, HI

Post by E28M5 SubDriver »

Indeed there are a couple on Oahu, but realtively slim on the Bimmer parts inventory. There are only 3 E28 M5's on the island, and very few E28's in general out here. Non-garage kept vehicles don't survive for long. The other M5's are super-pristine low-mileage variants (<40K miles) relative to mine. Will probably have to source the insulation from the mainland...
wkohler
Posts: 50939
Joined: Oct 05, 2006
Location: Phönix, Arizona, USA
Contact:

Post by wkohler »

That will not be a fun item to ship. They made a ton of 528s, so you might get lucky.
E28M5 SubDriver
Posts: 18
Joined: Jun 15, 2008
Location: Honolulu, HI

Post by E28M5 SubDriver »

I'll definitely keep an eye out for used stuff to turn up on-island. Any ideas for substitute / better than OE replacement heat absorbent or reflective products?
craggd
Posts: 66
Joined: Jun 23, 2007
Location: Palo Alto, CA

M5 & other e28's are different

Post by craggd »

Pretty sure this is a piece that is specific to the e28 M5. It has a one piece foam/cardboardish cover that spans the whole hood, where as the other e28's have three separate pieces of foam that cover the indentations. Best bet I think would be to watch for someone parting a wrecked M5 (one seller on ebay right now). Good luck. Dave
fewofm
Posts: 456
Joined: Jan 30, 2008
Location: Barrington, RI

Try Bavarian Autosport

Post by fewofm »

Several 6er enthusiests at Sharkfest had new stuff on their hoods that claimed from there. I could use an update myself.
wkohler
Posts: 50939
Joined: Oct 05, 2006
Location: Phönix, Arizona, USA
Contact:

Re: M5 & other e28's are different

Post by wkohler »

craggd wrote:Pretty sure this is a piece that is specific to the e28 M5. It has a one piece foam/cardboardish cover that spans the whole hood, where as the other e28's have three separate pieces of foam that cover the indentations. Best bet I think would be to watch for someone parting a wrecked M5 (one seller on ebay right now). Good luck. Dave
The 528e has the same style piece. Unfortunately, I haven't inspected every nook and cranny of the respective pieces, but just looking at some indentations that line up with, well, nothing made me think that they might be interchangeable.
ScottT80
Posts: 190
Joined: Feb 12, 2006
Location: Upstate, SC

Post by ScottT80 »

I just bought an M5 and mine is missing it too... what have you guys come up with?
M5ZEALOT
Posts: 1271
Joined: Aug 14, 2007
Location: San Diego, CA

Post by M5ZEALOT »

ScottT80 wrote:I just bought an M5 and mine is missing it too... what have you guys come up with?
Hold the rotten tomatoes.....if you ever find one, wash it well with Simple Green and paint it with flat black high temp engine paint. Mine looks brand new and has not caught fire or faded! (3 months now since painting) :banana:
Mark in Toronto
Posts: 2442
Joined: Feb 14, 2008
Location: Toronto

Post by Mark in Toronto »

M5ZEALOT,

Can you post pics of the painted one piece hood cover? I cleaned mine with Simple Green last year but the result is not 100%.

Your approach sounds like the perfect solution to bringing the cover back to life.

Thanks in advance.
JayM
Posts: 473
Joined: Oct 13, 2006
Location: Ottawa, Canada

Re: Hood Insulation

Post by JayM »

E28M5 SubDriver wrote:Since I've owned my M5 I always noted that the PO had removed the underhood insulation for whatever reason. Now I'm growing concerned that here in the Hawaii sun/heat with how hot the S38 runs that my hood paint will cook off (already starting to see evidence to this end). Going to Maximilian and other OE suppliers it looks like the underhood insulation is NLA. Anybody have good substitutes? I imagine folks running turbo engines (Dinan and Alpina B7) probably have good products at hand, but a search of the site here didn't turn up any compelling answers...thoughts on good replacements for the factory underhood insulation?
-Josh
Try Maximilian again, but go Euro. I checked for mine (with my VIN), and it shows up as available, at $44 for the centre and $18 each side. I haven't called to confirm it's actually available, but I did notice that it's not listed under the US model. I'll probably be calling them next week to see if they have it, as I need to replace mine as well.
wkohler
Posts: 50939
Joined: Oct 05, 2006
Location: Phönix, Arizona, USA
Contact:

Re: Hood Insulation

Post by wkohler »

JayM wrote:
E28M5 SubDriver wrote:Since I've owned my M5 I always noted that the PO had removed the underhood insulation for whatever reason. Now I'm growing concerned that here in the Hawaii sun/heat with how hot the S38 runs that my hood paint will cook off (already starting to see evidence to this end). Going to Maximilian and other OE suppliers it looks like the underhood insulation is NLA. Anybody have good substitutes? I imagine folks running turbo engines (Dinan and Alpina B7) probably have good products at hand, but a search of the site here didn't turn up any compelling answers...thoughts on good replacements for the factory underhood insulation?
-Josh
Try Maximilian again, but go Euro. I checked for mine (with my VIN), and it shows up as available, at $44 for the centre and $18 each side. I haven't called to confirm it's actually available, but I did notice that it's not listed under the US model. I'll probably be calling them next week to see if they have it, as I need to replace mine as well.
He needs the single piece insulation, not the 3-piece foam.
JayM
Posts: 473
Joined: Oct 13, 2006
Location: Ottawa, Canada

Post by JayM »

Oop. Mine never had it, so I just assumed. Apologies.
M5ZEALOT
Posts: 1271
Joined: Aug 14, 2007
Location: San Diego, CA

Post by M5ZEALOT »

Mark in Toronto wrote:M5ZEALOT,

Can you post pics of the painted one piece hood cover? I cleaned mine with Simple Green last year but the result is not 100%.

Your approach sounds like the perfect solution to bringing the cover back to life.

Thanks in advance.
Hey Mark, I was afraid someone would ask since I don't have any recent pics of the insulation. I will get some today. It looks brandnew! And no fires yet! :laugh:
Post Reply