WTB non-rusted A-frame

Buy, sell, or trade parts.
Post Reply
fukoa
Posts: 1604
Joined: Sep 18, 2007
Location: Friendship ,Wi

WTB non-rusted A-frame

Post by fukoa »

I am looking to buy an A-frame with no rust [ The one that the engine and the steering box are bolted on } , send me pictures of what you have and money you are asking to [email protected]
Shipping is to 60634
Thanks
a
Posts: 12473
Joined: Feb 12, 2006
Location: Marshfield ,MA

Post by a »

I am assuming this is for a 535? I have one that is in good shape. Any rust would be surface rust as it has 20 yrs of oil on it. :laugh: 50 $ + the ride Aliosman
fukoa
Posts: 1604
Joined: Sep 18, 2007
Location: Friendship ,Wi

Post by fukoa »

all are the same as long as they are from e28 [ 518 ,525,528.525 ...] can you send me some pix to [email protected]
Thanks
alijonny
Posts: 5612
Joined: Apr 09, 2008
Location: Chicago, IL

Post by alijonny »

pick n pull junkyard in hammond, IN my friend, there is a 535is ripe for the pickin and a bunch of e28's hurry before i get all the parts. $1 entry part will probably be like $10-15 after you pull it. good luck!
Shawn D.
Beamter
Beamter
Posts: 22372
Joined: Feb 12, 2006
Location: Alpharetta, GA
Contact:

Re: WTB non-rusted A-frame

Post by Shawn D. »

fukoa wrote:I am looking to buy an A-frame with no rust [ The one that the engine and the steering box are bolted on }
That's not an A-frame, obviously, as it's not A-shaped. It's a subframe or crossmember.
fukoa
Posts: 1604
Joined: Sep 18, 2007
Location: Friendship ,Wi

Post by fukoa »

pick n pull junkyard in hammond, IN my friend, there is a 535is ripe for the pickin and a bunch of e28's hurry before i get all the parts. $1 entry part will probably be like $10-15 after you pull it. good luck!


Alijony , can you give me the address or directions how to get there


That's not an A-frame, obviously, as it's not A-shaped. It's a subframe or crossmember.

As long as you know what I am talking about , how I call it dosen't count , right :roll:
alijonny
Posts: 5612
Joined: Apr 09, 2008
Location: Chicago, IL

Post by alijonny »

search mapquest for the intersection of summer street and Indianapolis blvd in Hammond, IN. or search for pick n pull junkyards on google.
alijonny
Posts: 5612
Joined: Apr 09, 2008
Location: Chicago, IL

Post by alijonny »

Pick N Pull
2015 E Summer St
Hammond, IN 46320
(219) 844-2642

there are a few e28 that have no engines that would be an easy pull of the crossmember/ k member (as known on mustangs).
fukoa
Posts: 1604
Joined: Sep 18, 2007
Location: Friendship ,Wi

Post by fukoa »

Thanks for the leads alijonny

That place is great , I found what I needed and some other parts that I was looking for a long time
Blue Shadow
Posts: 10532
Joined: Feb 12, 2006
Location: SE PA

Post by Blue Shadow »

Actually it is a "front axle support" according to BMW's ETK, helpful for those that use the search function.

a nearly 900 dollar part new. Ouch.
Post Reply