Here is the connector with one of the two halves missing:
And here is the tube:
External links now open in a new browser tab - turn this off in your UCP - Read more here.
Help me ID a connector and tube
Help me ID a connector and tube
Both are located under the master cylinder.
Here is the connector with one of the two halves missing:
And here is the tube:
Here is the connector with one of the two halves missing:
And here is the tube:
Last edited by gwb72tii on Mar 09, 2025 8:23 PM, edited 1 time in total.
Re: Help me ID a connector and tube
The 1st image may be the ABS sensor connector???
2nd is the interior temp sensor vacuum line. Connects to a nipple under the manifold. Feel around, hard to miss.
2nd is the interior temp sensor vacuum line. Connects to a nipple under the manifold. Feel around, hard to miss.
Re: Help me ID a connector and tube
And that black part is supposed to be a flow restrictor to minimize the vacuum leak, although IIRC they were cloth covered. So, if it is a flow restrictor, keep it, if it's not, it's just a size adapter between the semi clear plastic and the vacuum port on the bottom of the intake, in which case you'll need it or something anyway.kojo96 wrote: Mar 09, 2025 7:44 PM The 1st image may be the ABS sensor connector???
2nd is the interior temp sensor vacuum line. Connects to a nipple under the manifold. Feel around, hard to miss.