External links now open in a new browser tab - turn this off in your UCP - Read more here.
New here and to the E28 community
-
- Posts: 9
- Joined: Mar 29, 2023 10:38 PM
- Location: TX, USA
New here and to the E28 community
Hey y’all - I’m James.
Been looking at E28s for over a decade and finally pulled the trigger. Picked up an 88 M5 project that needs a lot more than TLC.
Already benefitting from the community here and very grateful for your collective contributions.
When I figure out image sharing, I’ll post some pics.
Been looking at E28s for over a decade and finally pulled the trigger. Picked up an 88 M5 project that needs a lot more than TLC.
Already benefitting from the community here and very grateful for your collective contributions.
When I figure out image sharing, I’ll post some pics.
Re: New here and to the E28 community
Welcome to the group!
Posting pictures is easy, but they have to be hosted elsewhere. Here's a write up on it. viewtopic.php?f=1&t=147488
Posting pictures is easy, but they have to be hosted elsewhere. Here's a write up on it. viewtopic.php?f=1&t=147488
-
- Posts: 9
- Joined: Mar 29, 2023 10:38 PM
- Location: TX, USA
-
- Posts: 9
- Joined: Mar 29, 2023 10:38 PM
- Location: TX, USA
Re: New here and to the E28 community
Thank you and thanks for this. Clearly I completely skipped over that part of FAQ in the forum guide.Mike W. wrote: Apr 04, 2023 1:36 PM Welcome to the group!
Posting pictures is easy, but they have to be hosted elsewhere. Here's a write up on it. viewtopic.php?f=1&t=147488
-
- Posts: 10345
- Joined: Feb 12, 2006 12:00 PM
- Location: SE PA
Re: New here and to the E28 community
Holy crap you did that quick.
-
- Posts: 10345
- Joined: Feb 12, 2006 12:00 PM
- Location: SE PA
Re: New here and to the E28 community
Mike is good for that. Probably has a doc he just pastes when he posts that.adriftdeterminist wrote: Apr 04, 2023 1:52 PM
Thank you and thanks for this. Clearly I completely skipped over that part of FAQ in the forum guide.
That car looks to be black paint dipped with the bumper covers and bumpers appearing to be painted.
Looks very nice but you say needs lots more than TLC, gonna fill us in?
A place with a pile of dead links and a pile of good links to projects as well as the Electrical Troubleshooting Manuals, middle of the left column: www.e38.org/e28 if you need info on some projects that aren't here on my. And then Rod's pages here on my, lots of good projects.
Welcome.
Gonna drift this thing?
Re: New here and to the E28 community
Nice e-brake.
Welcome and
Welcome and

-
- Posts: 9
- Joined: Mar 29, 2023 10:38 PM
- Location: TX, USA
Re: New here and to the E28 community
Pretty sure I’d crash the servers by the sheer amount of text required to document everything. /SBlue Shadow wrote: Apr 05, 2023 12:22 PMMike is good for that. Probably has a doc he just pastes when he posts that.adriftdeterminist wrote: Apr 04, 2023 1:52 PM
Thank you and thanks for this. Clearly I completely skipped over that part of FAQ in the forum guide.
That car looks to be black paint dipped with the bumper covers and bumpers appearing to be painted.
Looks very nice but you say needs lots more than TLC, gonna fill us in?
A place with a pile of dead links and a pile of good links to projects as well as the Electrical Troubleshooting Manuals, middle of the left column: www.e38.org/e28 if you need info on some projects that aren't here on my. And then Rod's pages here on my, lots of good projects.
Welcome.
Gonna drift this thing?
The car arrived the day before I was headed out of town so I’m still working through a full assessment.
A few things off the top:
- Alternator and battery need to be replaced
- Electrical system needs a once over, I suspect some fuses/fuse box may be problematic
- Proper repaint to address some minor corrosion, dents and just age
- Brake system needs to be overhauled and at a minimum, rear driver’s side caliper needs to be rebuilt
- Interior is a bit of a mess — cracked dash (of course), missing door handles, driver’s side rear window is stuck open, glovebox hinge is broken, etc.
- Front windshield needs to be replaced
Drifting? Nah but I have already purchased a Fast and Furious wrap to demonstrate to the world the speed contained within.
-
- Posts: 152
- Joined: Jan 05, 2021 7:32 PM
- Location: Westchester Co NY
Re: New here and to the E28 community
Congrats and welcome. My son and I are on a “lil more than TLC” run for the last 2 years on our M5 project (there’s a thread over on the m5 section). Have fun with it and take lots of pictures. They will help you and others.
Fun fact, our car came from Houston(by way of Greenwich CT). We might have some Texas state flag roundel decals if you’re interested
Fun fact, our car came from Houston(by way of Greenwich CT). We might have some Texas state flag roundel decals if you’re interested

Re: New here and to the E28 community
Congratulations on your acquisition and welcome to the group!
-
- Posts: 9
- Joined: Mar 29, 2023 10:38 PM
- Location: TX, USA
Re: New here and to the E28 community
Thanks for the welcome and love your thread! Great inspiration and I may have a question or two for you.Fanclutchnut wrote: Apr 10, 2023 7:46 AM Congrats and welcome. My son and I are on a “lil more than TLC” run for the last 2 years on our M5 project (there’s a thread over on the m5 section). Have fun with it and take lots of pictures. They will help you and others.
Fun fact, our car came from Houston(by way of Greenwich CT). We might have some Texas state flag roundel decals if you’re interested![]()
If you do have a Texas roundel to spare, I'd certainly be interested.
Re: New here and to the E28 community
Hey, remember me? How’s the project M5 going? Did you get the windshield installed?
Re: New here and to the E28 community
adriftdeterminist wrote: Apr 19, 2023 12:26 PMThanks for the welcome and love your thread! Great inspiration and I may have a question or two for you.Fanclutchnut wrote: Apr 10, 2023 7:46 AM
Fun fact, our car came from Houston(by way of Greenwich CT). We might have some Texas state flag roundel decals if you’re interested![]()
If you do have a Texas roundel to spare, I'd certainly be interested.
In honor of Jim's memory
those decals deserve to live on.
those decals deserve to live on.