How to connect Innovate AFR MTX-L to Motronic ECU 1.3?
It has 5 stripped wire ends
Red - to a switched 12V source.
Black - to the battery or to the ECU pin #10 ???
White, goes to headlights
Yellow - ??? I suppose it's the one which goes to pin #28
Brown - unused
Am I right?
http://screencast.com/t/HjRYBQOQw
How to connect Innovate AFR MTX-L to Motronic ECU 1.3?
Re: How to connect Innovate AFR MTX-L to Motronic ECU 1.3?
Not sure but you could put a meter on yellow and see if it dithers at temp.