Hello MyE28.com forums! I am 6'6" tall and in a relationship with a 1987 528e. It would be an understatement to say that headroom is non-existent. It has been suggested to me that I have a racing seat installed to increase headroom.
I am incredibly keen on this idea. Of course I want good value for the seat but far more important to me is attaining the absolute most clearance possible. There are a great many options on the site I have been perusing: andysautosport.com and I would like to know which seat the members of the MyE28 community would choose to get the results I desire.
Thank you for taking the time to read this, and hopefully respond. Be well.
"Racing" Seat
-
nickskater09
- Posts: 177
- Joined: Jan 02, 2012
- Location: Cumming, GA
-
akrenegade
- Posts: 22
- Joined: Mar 29, 2010
- Location: Arcata, CA
I have Recaro SR3's in my M3, I have sat in a lot of different aftermarket seats, and I'm partial to Recaro. One consideration should be that most of the seats are going to be quite narrow, which won't be a problem for you if you're lean, if you're "not lean" you may have to focus your search on XL type seats.
i have recaros in both my e30 and shark and they are at least a inch lower then the stock sport seats in either car

i use e30 sport seat rails mounted directly to the 6 bolt bottom of the seat, for the e24/28 you need to widen the cross bar and i used a bolt of the right diameter to use as a spud and welded it, i guess through bolting would work in place of welding

a piece of angle iron works for the front mounting point, you use this piece to set the incline of the seat and when i did my e30 i made several holes to tweak the angle, this time i just made one where i liked it on the other set


2" piece of angle trimmed and ready

got both sets from this guy http://www.ebay.com/sch/nut.onlineshop1 ... 7675.l2562 a year or two apart, he usually has a set or two of the old school recaros up, takes about 3 months to arrive in the states

i use e30 sport seat rails mounted directly to the 6 bolt bottom of the seat, for the e24/28 you need to widen the cross bar and i used a bolt of the right diameter to use as a spud and welded it, i guess through bolting would work in place of welding

a piece of angle iron works for the front mounting point, you use this piece to set the incline of the seat and when i did my e30 i made several holes to tweak the angle, this time i just made one where i liked it on the other set


2" piece of angle trimmed and ready

got both sets from this guy http://www.ebay.com/sch/nut.onlineshop1 ... 7675.l2562 a year or two apart, he usually has a set or two of the old school recaros up, takes about 3 months to arrive in the states
Thank you
Thank you for all the responses. I appreciate all of the wonderful information and especially the pictures. I know I'll make a much more informed decision. I am going to sit in as many of them as possible, and look long and hard at the brands suggested. Thank you all!

