The car Finaly got the car running.

[bmw335is turbo]

I had a friend who is a BMW tech travel 2 hrs to get my car running, and only boosting 10 lbs that little E30 is fast. Still need to tune it a little better then I will bump to 15 lbs were I will stay for now.
http://www.cardomain.com/memberpage/629515

[Edit by bmw335is turbo on [TIME]1110166730[/TIME]]

[gol10dr1]

congrats dude, can't wait to see that beast running. when is the tec 3 getting ordered?

[bmw335is turbo]

I will not be looking Towards tec 3 until the end of the year the car has been sitting for to long I am going to enjoy driving it and get all my gages boost controller hooked up and start playing with air fuel I also want to dyno at 10 and 15 before I change engine management systems
but the car at 10 psi is INSAINE!!!!!!!!!!!!!!!!!!!


[Edit by bmw335is turbo on [TIME]1110203742[/TIME]]

[gol10dr1]

wut are you doing for management now? do you have any more pics or vids for us. i wanna see more of this beast.

[pdx 528e]

[QUOTE="gol10dr1"]wut are you doing for management now? do you have any more pics or vids for us. i wanna see more of this beast.[/QUOTE]

Any under hood shots?

[bmw335is turbo]

[QUOTE="gol10dr1"]wut are you doing for management now? do you have any more pics or vids for us. i wanna see more of this beast.[/QUOTE]

[QUOTE="pdx 528e"]Any under hood shots?[/QUOTE]
http://www.cardomain.com/memberpage/629515

[gol10dr1]

all i can say is.......NICE!!!! one other thing, any plans to get it dynoed soon? i wanna see what kind of numbers this thing will pushout.

[bmw335is turbo]

I have been working on and off on this car for 8 months this weekend i am going to get under the car an recheck every thing, bolts, fluid and chang out the diff to a 2:78 LSD.
I am also going to clean up the engine, wires and all hose clamps. The boost controller still needs to be installed.
The dyno will be a few months down the road.

[Tjn182]

You JUST got the engine started? Is the engine rebuilt or used? Cause I would never dump 10psi in an engine right off the bat if it was just rebuilt -- There's that 1200+ mile break in period.

[Monotalonawd]

Great car and great setup!

Jason, I read that you rebuilt the M30 with the stock pistons... do you also use the factory rods?

[bmw335is turbo]

[QUOTE="Tjn182"]You JUST got the engine started? Is the engine rebuilt or used? Cause I would never dump 10psi in an engine right off the bat if it was just rebuilt -- There's that 1200+ mile break in period.[/QUOTE]
Bottom end is stock.



[Edit by bmw335is turbo on [TIME]1110330867[/TIME]]

[T_C_D]

Chip shipped via UPS 3 day select today for delivery on Friday.
Todd

[bmw335is turbo]

Thanks Todd.
Today after work I pulled the 3:25 LSD and prepped the 2:79 LSD I will install tomorrow after work also I found a home in the dash for the boost controller.

My good friend is coming down this weekend to help me clean up the engine bay, wires etc. And he is going to install gage pillar and start wiring everything up on the inside.

[russc]

Hey,
Looking at your Cardioman page, is that really a "292" cam???? Do you know what the full specs on the cam is, especially overlap. Weve been having a large discussion about higher duration/overlap cams and their compatability with forced induction. You may be the first to use a larger duration/overlap cam?

RussC

[bmw335is turbo]

I am running the same cam as e34 biturbo (Pat P) not sure on the spec.
I will call and find out.