Page 1 of 1
for FSAEracer03.....
Posted: Mar 04, 2007 1:38 PM
by achilles
I have been looking for a writeup if your budget turbo 318 for a while now @e30tech.com and haven't been able to find it. If possible could you repost your equipment or link me to a thread? I am looking to do exactly the same thing. Chris
Posted: Mar 05, 2007 8:25 PM
by M3fan4eva
www.r3vlimited.com
Register on there. There are alot of turbo M10's and M42's on that site.
aready am a member....
Posted: Mar 06, 2007 11:59 AM
by achilles
I am looking for specific information on FSAEracers' project as it has been referenced to me several times on different boards. I have been unsuccessfu; with any searches so far. Chris
Posted: Mar 08, 2007 12:58 PM
by FSAEracer03
http://www.e30tech.com/forum/viewtopic. ... 146#260146
There was the main thread I had on e30tech. If I were to repeat the build again (which I basically am, except on a swapped 528i), I would change two things:
1) Put in a worthwhile head gasket. I knew better, but decided to take the gamble on the stock headgasket... and I lost.
2) Try out a push-through AFM setup and see how it differs from the draw-through.
Best of luck on the project!
Kevin[/url]