Page 1 of 1
Lemforder UCAs - NLA
Posted: Apr 07, 2025 3:20 PM
by Philo
Cant seem to find these now, only Delphi, Hamburg Tech and URO, can't even find Meyley HDs.. What's going on ?
Re: Lemforder UCAs - NLA
Posted: Apr 07, 2025 6:59 PM
by Mike W.
Old news, it's been discussed before. I think BMW UCAs are still available, at a breathtaking price. Being the cheap SOB I am, I'd be tempted to try Schiedmanns off brand, I trust them more than US suppliers somehow. Still a roll of the dice at best.
Re: Lemforder UCAs - NLA
Posted: Apr 10, 2025 9:40 PM
by Chicagotrader92
Is Delphi that bad? I installed some a couple of weeks ago with Powerflex bushings.
Re: Lemforder UCAs - NLA
Posted: Apr 27, 2025 7:12 PM
by Philo
Decided to go with Turner's E32 Spherical UCAs. Just had to grind them down to 50mm. I guess 17" wheels and big brakes is too much for stock 7 series UCAs, I only got about 10k mile on them and they are toast.
https://www.dropbox.com/scl/fo/wp3jauab ... tdiwm&dl=0
Re: Lemforder UCAs - NLA
Posted: Apr 29, 2025 4:47 PM
by Mike W.
Philo wrote: Apr 27, 2025 7:12 PM
Decided to go with Turner's E32 Spherical UCAs. Just had to grind them down to 50mm. I guess 17" wheels and big brakes is too much for stock 7 series UCAs, I only got about 10k mile on them and they are toast.
https://www.dropbox.com/scl/fo/wp3jauab ... tdiwm&dl=0
OK, so the bushings are toast. I assume they went in new arms, what brand and how are they holding up? I had more problems with the ball joints than the bushings, but I do seem to be the exception.