Page 2 of 2
Re: I had the same fan... Bought this as replacement
Posted: Sep 28, 2009 12:11 AM
by 1st 5er
The quality of our fans will blow you away!
connector question...
Posted: Oct 01, 2009 9:21 PM
by Armydiver
The new fan arrived and quality does appear to be good... how ever the connectors do not match? The new fan has round pins on the connector and the original fan has flat connectors?
Is this due to the fan being that weird unknown BMW part number? Is it has simple as splicing in the old connector? I would think so but would like to get some feedback before hack up the new fan.
Thanks....
Posted: Oct 01, 2009 9:27 PM
by wkohler
I doubt that fan has a BMW part number if you bought the one in the listing.
Posted: Oct 01, 2009 10:38 PM
by Armydiver
Thanks for the reply... I was referring to the original fan; the new one definitely does not have a BMW part number . It would appear that the connector should be able to be spliced in with no issue.
The fan is much more solid than what I pulled out.
I just wondered if the oem had the pin type connector?
Posted: Oct 02, 2009 11:52 AM
by Jean
Maybe with e28s there were more than one type of fan and connector used depending on the year... that's how it is in e30s. I've seen 2 different fans (Flat blades/rounded blades) and 3 different types of connectors in oem configuration. I would leave the chassis plug alone and splice the connector from your old fan to the new fan.
Posted: Oct 02, 2009 3:23 PM
by wkohler
x2. When you have to make those changes, definitely change the part - not the car.
Posted: Oct 02, 2009 5:21 PM
by Armydiver
Thanks... I will let you know how it goes.
Posted: Oct 02, 2009 6:30 PM
by Armydiver
This fan is great, works very well!
Posted: Oct 02, 2009 6:57 PM
by Karl Grau
Re: Whoa. Aux Fan Jigga What?
Posted: Oct 23, 2018 2:43 PM
by LeiseyJr
