Page 2 of 2
Posted: Oct 05, 2012 8:38 PM
by SoopaGhetto
freetoride wrote:I've replaced many ball joints on different types of vehicles and and striking the knuckle does indeed work well. Many will just fall apart.
i wish i got mine to do that. is there a way to diagram where/how to hit? im just thinking i was hitting it in the wrong area. also, i was using a 2.5lb hammer. didnt have my 8lber with me at school
Posted: Oct 05, 2012 8:56 PM
by freetoride
I have a 4lb shop hammer, for smaller spaces I use a 2 lb brass hammer. There is some technique to it I guess, its not so much the weight but the sharp straight blow that will do it. I think an 8 lb could break or bend something else.
Posted: Oct 07, 2012 12:36 PM
by waferman
The tool shown shown above by someone is paramount- avoiding beating on things for hours even with a pickle fork. Use Harbor Freight and buy a 'front end kit'. You won't regret it! It does come with more pieces than you need, but they may work on other cars also. control arms pop out in minutes. You can buy the exact tool as shown above also for much less, on Fleabay.