group buy: in-cluster digital oil temp/pressure gauge

[KrautnotRice]

I've listed my (unopened) set in C for sale for the GB price, if anyone is interested.
EDIT: SOLD

[Jan E-28]

Anyone has the wire diagram?
Or can copy information here.

See on page 5 that there was sent a mail to all the buyers with wire instructions.

[Owndapwn]

Does anyone have a source for M10x1.0 to M12x1.5 adapters, to allow the pressure sender to be installed in the rear of the head, where the stock switch is?
I've seen a couple of these in pictures, but no luck finding one for sale.

[Jan E-28]

Wire diagram:

http://www.mye28.com/viewtopic.php?f=3&t=143076

[Foonfer]

What's the status of the list for this? I asked to be added to it on April 2015 and then on December 2015. Never got any feedback.

[Jan E-28]

Andreas Claas (http://www.claasi.de/) that made them still sell it for 120 Euro + shipment. mail: rolandbmw02@aol.com

[wkohler]

He charged me like$350 for mine.

[GermanPanzer]

I'm in for a set

[Jan E-28]

He charged me like$350 for mine.

?
Should be like $128 + shipment... Why pay that price

[wkohler]

BECAUSE THAT IS WHAT HE CHARGED ME!!

$264. Just found the check. Still more than twice as much.

[josepilove]

I'm in for a set

Yea, me too.

-- Added Mar 12, 2017 8:45 AM --

I emailed him last night (Rolland, not Andreas). Here are the pricing details.

The digital oil pressure and oil temperature gauges are delivered in a set for €120 containing:
- the display
- the electronic in a housing
- the display foil
- all cables and mounting material.

He also sells the required senders:
1. a VDO 0-10bar with warning contact ( 10-180 Ohm), M12x1.5 - €42
2. an original BMW E30 M3 oil temperature sender - €30

Shipping:
- Germany €5
- EU €13
- Worldwide €15

Sender fitment/adapters depend on engine.

[bob02]

BECAUSE THAT IS WHAT HE CHARGED ME!!

Wkohler, didn't you receive the senders and the distribution block with your order? I don't recall how Roland determined the price, but 250.00 plus 14.00 shipping would have been in the ballpark a few years ago. I do recall the temp sender costing nearly 40.00, and the pressure sender was slightly more. Sorry you feel slighted.

Bob Newman

[wkohler]

i don't feel slighted. I do have senders and the block. The original group buy seemed to have senders included. I guess I didn't realize the block isn't a standard piece. I haven't gotten around to installing it yet since I've been so busy so I haven't looked at it since it arrived. I think timing was the worst thing since I bought mine from him and then the group buy happened immediately after.

[GermanPanzer]

I'm in for a set

Yea, me too.

-- Added Mar 12, 2017 8:45 AM --

I emailed him last night (Rolland, not Andreas). Here are the pricing details.

The digital oil pressure and oil temperature gauges are delivered in a set for €120 containing:
- the display
- the electronic in a housing
- the display foil
- all cables and mounting material.

He also sells the required senders:
1. a VDO 0-10bar with warning contact ( 10-180 Ohm), M12x1.5 - €42
2. an original BMW E30 M3 oil temperature sender - €30

Shipping:
- Germany €5
- EU €13
- Worldwide €15

Sender fitment/adapters depend on engine.

Thanks , I will s send PayPal money to that email.

[ahab]

My advice would be to acquire your own senders. The pressure sender I received was generic and not VDO. It registers 8-9 bar when cold and despite the oil pump having less than 10k miles on it, i don't believe the S38 is capable of building building north of 117 PSI

[GermanPanzer]

Attention Rolland, I sent payment to your email.

Thank you

[Owndapwn]

My advice would be to acquire your own senders. The pressure sender I received was generic and not VDO. It registers 8-9 bar when cold and despite the oil pump having less than 10k miles on it, i don't believe the S38 is capable of building building north of 117 PSI

You wouldn't happen to have a part number for the VDO sender in M12x1.5, would you?

[josepilove]

You wouldn't happen to have a part number for the VDO sender in M12x1.5, would you?

The VDO part number is: 360-024

I found it at eGauges.com for $36 - https://www.egauges.com/ProductDetails. ... de=360-024

[Chimi-Changa]

Greets! Anyone have one of these available? Thank you!