External links now open in a new browser tab - turn this off in your UCP - Read more here.
TPS Adjustment for the 1.3 conversion
TPS Adjustment for the 1.3 conversion
So I just did the throttle plate adjustment to 0.002" but when I search for adjusting the TPS, all of the adjustments are for small three wire one (the one my B34 used to have) but nothing that references the round plug one. I understand that this one is more of a variable resistor instead of the switches on the prior version but is there a specific position or resistance value to hit when in idle? I couldn't find a pinout for the connector so I don't know which pins to read either.
Re: TPS Adjustment for the 1.3 conversion
Never mind. Installed everything and with the engine running (originally around 1200 RPM) rotated it all the way counterclockwise until the RPM dropped to around 850/900. What was interesting was that when I tightened the bolts the RPM's went back up so I had to keep some force on it while I tightened the bolts (good thing they are hex key now!).